PV PRODUCTS
From wafers, polysilicon, and UMG to module assembly, inverters, and thin-film systems,
Sunpeak delivers a comprehensive solar supply chain.
Including cables, junction boxes, connectors, and mounting structures — engineered for efficiency and reliability.
Solar Pans
key features
- Multi-busbar solar cells lower hotspot risk and improve conductivity.
- Excellent Anti-PID performance even in extreme environments.
- Enhanced micro-crack resistance and stress balance.
- Up to 21.01% efficiency with lower degradation rate.
- More power output under weak sunlight or cloudy weather.
- Certified to withstand 5400Pa snow & 2400Pa wind loads.
Certifications & Warranty
- 30-year quality warranty with free replacement for any non-human damages.
- Certified by: IEC 61215, IEC 61730,CE,CQC
- ISO 9001: 2015: Quality Management System
- ISO 14001: 2015: Environmental Management System
- ISO 45001: 2018:Occupational Health and Safety Management System
key features
- Multi-busbar solar cells lower hotspot risk and improve conductivity.
- Excellent Anti-PID performance even in extreme environments.
- Enhanced micro-crack resistance and stress balance.
- Up to 21.01% efficiency with lower degradation rate.
- More power output under weak sunlight or cloudy weather.
- Certified to withstand 5400Pa snow & 2400Pa wind loads.
Certifications & Warranty
- 30-year quality warranty with free replacement for any non-human damages.
- Certified by: IEC 61215, IEC 61730,CE,CQC
- ISO 9001: 2015: Quality Management System
- ISO 14001: 2015: Environmental Management System
- ISO 45001: 2018:Occupational Health and Safety Management System
key features
- Multi-busbar solar cells lower hotspot risk and improve conductivity.
- Excellent Anti-PID performance even in extreme environments.
- Enhanced micro-crack resistance and stress balance.
- Up to 21.30% efficiency with lower degradation rate.
- More power output under weak sunlight or cloudy weather.
- Certified to withstand 5400Pa snow & 2400Pa wind loads.
Certifications & Warranty
- 30-year quality warranty with free replacement for any non-human damages.
- Certified by: IEC 61215, IEC 61730,CE,CQC
- ISO 9001: 2015: Quality Management System
- ISO 14001: 2015: Environmental Management System
- ISO 45001: 2018:Occupational Health and Safety Management System
key features
- Multi-busbar solar cells lower hotspot risk and improve conductivity.
- Excellent Anti-PID performance even in extreme environments.
- Enhanced micro-crack resistance and stress balance.
- Up to 21.29% efficiency with lower degradation rate.
- More power output under weak sunlight or cloudy weather.
- Certified to withstand 5400Pa snow & 2400Pa wind loads.
Certifications & Warranty
- 30-year quality warranty with free replacement for any non-human damages.y
- Certified by: IEC 61215, IEC 61730,CE,CQC
- ISO 9001: 2015: Quality Management System
- ISO 14001: 2015: Environmental Management System
- ISO 45001: 2018:Occupational Health and Safety Management System
key features
- Multi-busbar solar cells lower hotspot risk and improve conductivity.
- Excellent Anti-PID performance even in extreme environments.
- Enhanced micro-crack resistance and stress balance.
- Up to 21.27% efficiency with lower degradation rate.
- More power output under weak sunlight or cloudy weather.
- Certified to withstand 5400Pa snow & 2400Pa wind loads.
Certifications & Warranty
- 30-year quality warranty with free replacement for any non-human damages.
- Certified by: IEC 61215, IEC 61730,CE,CQC
- ISO 9001: 2015: Quality Management System
- ISO 14001: 2015: Environmental Management System
- ISO 45001: 2018:Occupational Health and Safety Management System
key features
- IP68 junction box and connectors provide high-level waterproofing and effectively resist harsh environments.
- Excellent anti-PID performance proven under 96h (85℃/85%) testing, and further improved to meet higher standards in extremely harsh conditions.
- New circuit design with lower internal current and reduced Rs loss.
- Special circuit design greatly reduces hotspot temperature.
- Up to 20% higher power generation, with reduced Levelized Cost of Electricity (LCOE).
Certifications & Warranty
- 30-year quality warranty with free replacement for any non-human damages.
- Certified by: IEC 61215, IEC 61730,CE,CQC
- ISO 9001: 2015: Quality Management System
- ISO 14001: 2015: Environmental Management System
- ISO 45001: 2018:Occupational Health and Safety Management System
key features
- IP68 junction box and connectors provide high-level waterproofing and effectively resist harsh environments.
- Excellent anti-PID performance proven under 96h (85℃/85%) testing, and further improved to meet higher standards in extremely harsh conditions.
- New circuit design with lower internal current and reduced Rs loss.
- Special circuit design greatly reduces hotspot temperature.
- Up to 20% higher power generation, with reduced Levelized Cost of Electricity (LCOE).
Certifications & Warranty
- 30-year quality warranty with free replacement for any non-human damages.
- Certified by: IEC 61215, IEC 61730,CE,CQC
- ISO 9001: 2015: Quality Management System
- ISO 14001: 2015: Environmental Management System
- ISO 45001: 2018:Occupational Health and Safety Management System
Inverts
| Model | VS0512AP5 | VS0812AP5 | VS1012AP5 | VS1512/24AP5 | VS2024AP5 |
| AC Input Voltage | 220VAC (standard) | ||||
| Input Voltage Range | 154–264VAC±5V (Nor), 185–264VAC±3V (UPS) | ||||
| Input Frequency | 50/60Hz ±5% | ||||
| Output Power | 500VA / 400W | 800VA / 640W | 1000VA / 800W | 1500VA / 1200W | 2000VA / 1600W |
| AC Output Voltage | 220V ±10% | ||||
| Battery Output Frequency | Same as input frequency | ||||
| Battery Output Voltage | 220VAC ±3% | ||||
| Battery Waveform | Pure sine wave | ||||
| Battery Type | Lead-acid / Gel / Lithium | ||||
| Battery Voltage | 12V | 12V | 12V | 12/24V | 24V |
| Charging Voltage | 13.7V | 13.7V | 13.7V | 13.7/27.4V | 27.4V |
| Max PV Array Power | 12V/400W | 12V/400W | 12V/400W | 12V/800W, 24V/1600W | 24V/1600W |
| Solar Input Voltage Range | 12V: 15–50VDC | 24V: 30–105VDC | |||
| Max Solar Charging Current | 60A | ||||
| Max AC Charge Current | 13A | 21A | 27A | 40A / 20A | 30A |
| Model | VS0512AP5 | VS0812AP5 | VS1012AP5 | VS1512/24AP5 | VS2024AP5 |
| AC Input Voltage | 220VAC (standard) | ||||
| Input Voltage Range | 154–264VAC±5V (Nor), 185–264VAC±3V (UPS) | ||||
| Input Frequency | 50/60Hz ±5% | ||||
| Output Power | 500VA / 400W | 800VA / 640W | 1000VA / 800W | 1500VA / 1200W | 2000VA / 1600W |
| AC Output Voltage | 220V ±10% | ||||
| Battery Output Frequency | Same as input frequency | ||||
| Battery Output Voltage | 220VAC ±3% | ||||
| Battery Waveform | Pure sine wave | ||||
| Battery Type | Lead-acid / Gel / Lithium | ||||
| Battery Voltage | 12V | 12V | 12V | 12/24V | 24V |
| Charging Voltage | 13.7V | 13.7V | 13.7V | 13.7/27.4V | 27.4V |
| Max PV Array Power | 12V/400W | 12V/400W | 12V/400W | 12V/800W, 24V/1600W | 24V/1600W |
| Solar Input Voltage Range | 12V: 15–50VDC | 24V: 30–105VDC | |||
| Max Solar Charging Current | 60A | ||||
| Max AC Charge Current | 13A | 21A | 27A | 40A / 20A | 30A |
| Battery Charging Voltage Range | 154–275VAC±5V | ||||
| Transfer Time | ≤10ms (UPS) / ≤20ms (INV) | ||||
| Load Peak Ratio | (MAX) 3:1 | ||||
| Protective Function | Overload / Short-circuit / Low-voltage / Anti-reverse | ||||
| Status Display | AC voltage, frequency, PV, battery, current, output, etc. | ||||
| Voice Prompt | Low battery / Overload / Fault alerts | ||||
| Operating Temp | -10°C ~ 50°C | ||||
| Storage Temp | -15°C ~ 45°C | ||||
| Relative Temp | -10°C ~ 90°C (no condensation) | ||||
| Noise | <45dB | ||||
| Model | VS6348 AM6B (support parallel) | VS12548 AM8B (support parallel) |
| System Voltage | 6300VA | 12500VA |
| Nominal Voltage | 230VAC | |
| Input Voltage Range | 90~275VAC±3V ; 170~275VAC±3V (selectable) | |
| Input Frequency | 50/60Hz±5% Auto sensing | |
| Rated Power | 5000W | 10000W |
| Battery Voltage (DC) | 48V | |
| Output Frequency | 50Hz / 60Hz ±1% | |
| Waveform | Pure sine wave | |
| Transfer Time (AC to DC) | ≦8ms (UPS) / ≦20ms (INV) | |
| Load Peak Ratio | (MAX)3:1 | |
| Output Voltage Regulation | ±10% | |
| Bypass Mode | YES | |
| Saver Mode | YES | |
| Battery Type | VRLA / GEL / GEL DEEP CYCLE / LITHIUM | |
| Input Protection | Input over current protection with fuse | |
| Output Protection | Overload, short circuit, high & low voltage, battery reverse protections | |
| AC Charging Current | 50A | 100A |
| Maximum PV Array Power | 48V: MPPT 150VDC (Customized 200VDC) | |
| Maximum Solar Charge Current | 60A | 120A |
| Maximum Solar PV Watt | 3200W | 6400W |
| LED Indicator Status | AC Line In: Green ; Inverter: Green Charging: Yellow ; Alarm: Red | |
| LCD Indicator | AC input voltage / input frequency, PV voltage / PV current / Output Voltage / Frequency / Battery voltage / Load current etc. | |
| Low Battery Alarm | Audible alarm - 5 seconds beeping | |
| Overload Alarm | Audible alarm - continuous beeping | |
| Fault | Audible alarm - continuous beeping | |
| Storage Temperature | -10℃~50℃ | |
| Operating Temperature | -15℃~45℃ | |
| Relative Temperature | 20℃~90℃ no condensation | |
| Noise (dB) | <45dB | |
| MODEL | JV3824AM8V | JV5048AM8V | JV6348AM8V |
| Rated output power | 3000W | 4000W | 5000W |
| Power Input | 220VAC (standard) / 110VAC (customized) | ||
| Input voltage range | 220V model: 154-264VAC±3V (normal mode), 185-264VAC±3V (UPS mode) 110V model: 77-132VAC±3V (normal mode), 92-132VAC±3V (UPS mode) | ||
| Input frequency | 50/60Hz±5% | ||
| OUTPUT | |||
| Output voltage under AC power | Same as input voltage | ||
| Output frequency under AC power | Same as input frequency | ||
| Output voltage under inverter mode | 220VAC±10% (110VAC±10%) | ||
| Output frequency under inverter mode | 50Hz or 60Hz±1% | ||
| Output waveform under inverter mode | Pure Sine Wave | ||
| BATTERY & CHARGER | |||
| Battery Type | Lead-acid, Water, or Lithium | ||
| Battery voltage | 24VDC | 48VDC | |
| Battery charging voltage | 27.4VDC | 54.8VDC | |
| PV INPUT | |||
| Max PV array power | 2700W | 5400W | |
| PV input voltage range (MPPT) | 30–245VDC | 60–245VDC | |
| Optimal Vmp operating range | 30–170VDC | 60–170VDC | |
| Max PV open-circuit voltage | 245VDC | ||
| Max solar charging current | 100A | ||
| AC INPUT | |||
| Max AC charging current | 63A (default 50A) | 83A (default 33A) | 52A (default 42A) |
| EFFICIENCY | |||
| Conversion time | ≤10ms (UPS) / ≤20ms (normal) | ||
| Load peak ratio | (MAX)3:1 | ||
| Standby power (W) | 16W | – | 32W |
| PROTECTION | |||
| Protection function |
Under grid power: input overcurrent circuit breaker protection Under inverter operation: overload, short circuit, low voltage, battery reverse polarity protection (fuse) | ||
| Status display |
Color segment display with LED indicator View AC voltage, AC frequency, PV voltage/current, output voltage/frequency, battery voltage, load current etc. LED shows mains power, charging, inverter status, fault status | ||
| Audible alert | Buzzer gives different alarm sounds based on fault codes | ||
| ENVIRONMENTAL PARAMETERS | |||
| Operating temperature | -10°C~+50°C | ||
| Storage temperature | -15°C~+45°C | ||
| Relative temperature | -10°C~90°C non-condensing | ||
| Noise | <45dB | ||
| PHYSICAL PARAMETERS | |||
| Machine dimensions (L*W*H)mm | 535*335*170mm | ||
| Model | EA2012EMH | EA3024EMH | EA4024EMH | EA6248EMH | EA8648EMH | EA11048EMH | |
| Input Formation | L+N+PE | ||||||
| AC Input | 220/230/240VAC | ||||||
| Input Voltage Range | 90–280VAC±3V (Normal) / 185–264VAC±3V (UPS) | ||||||
| Frequency | 50/60Hz (Adaptive) | ||||||
| Rated Power | 1600W | 3000W | 4000W | 6200W | 8600W | 11000W | |
| Output Voltage | 220/230/240VAC | ||||||
| Output Wave | Pure Sine Wave | ||||||
| Output Frequency | 220/230/240VAC ±5% | ||||||
| Transfer Time | 10ms for Computer, 20ms for Household | ||||||
| Peak Power | 3200VA | 6000VA | 8000VA | 12400VA | 17200VA | 22000VA | |
| Overload Ability | 2s@102%~110%, 10s@110%~130%, 3s@130%~150%, 400ms@>150% | ||||||
| Grid-connected Operation | |||||||
| Output Voltage | 220/230/240VAC | ||||||
| Grid Voltage Range | 170–265VAC | ||||||
| Grid Frequency Range | 49–51Hz / 59–61Hz | ||||||
| Output Current | - | - | - | 17.4A | 26.9A | 37.4A | 47.8A |
| Power Factor Range | >0.99 | ||||||
| Max Efficiency (DC/AC) | 98% | ||||||
| Battery & PV Input | |||||||
| Rated Voltage | 12VDC | 24VDC | 24VDC | 48VDC | |||
| Constant Charging Voltage | 14.1VDC | 28.2VDC | 28.2VDC | 56.4VDC | |||
| Float Charging Voltage | 13.5VDC | 27VDC | 27VDC | 54VDC | |||
| PV Charging Method | MPPT | MPPT | MPPT | MPPT | 2*MPPT | 2*MPPT | |
| Max PV Input | 2000W | 3000W | 5000W | 6200W | 2*5500W | 2*5500W | |
| MPPT Tracking Range | 30–500VDC | 60–500VDC / 90–500VDC | |||||
| Max PV Input Voltage | 500VDC | ||||||
| Max PV Charge Current | 100A | 100A | 120A | 120A | 150A | 150A | |
| Max AC Charge Current | 60A | 60A | 60A | 100A | 120A | 150A | |
| Max Charge Current | 100A | 100A | 120A | 120A | 150A | 150A | |
| LCD | Display mode/load/input/output | ||||||
| RS232 | 5PIN/Pitch2.54mm, Baud rate 2400 | ||||||
| Expansion Slot | Lithium BMS, WIFI, 2×5PIN/Pitch2.54mm | ||||||
| Parallel Interface | Not supported | ||||||
| Operating Temp | -10°C ~ 50°C | ||||||
| Storage Temp | -15°C ~ 60°C | ||||||
| Altitude | ≤1000m. If 1000m < h ≤ 4000m, derate accordingly | ||||||
| Humidity | Non-condensing | ||||||
| Noise | ≤50dB | ||||||
| Model | GA4024SMH | GA6248SMH | GA8648SMH | GA11048SMH |
| Input Formation | L+N+PE | |||
| AC Input | 220/230/240VAC | |||
| Input Voltage Range | 90–280VAC±3V (Normal), 185–264VAC±3V (UPS) | |||
| Frequency | 50/60Hz (Adaptive) | |||
| Rated Power | 4000W | 6200W | 8600W | 11000W |
| Dual Output Power | 4000W / 4500W | 6200W / 6500W | 8600W / 11000W | 11000W / 12000W |
| Output Voltage (AC) | 220/230/240VAC ±5% | |||
| Output Frequency | 50/60Hz ±0.1% | |||
| Output Wave | Pure Sine Wave | |||
| Transfer Time (Adjustable) | 10ms for Computer, 20ms for Household | |||
| Peak Power | 8000VA | 12400VA | 17200VA | 22000VA |
| Overload Ability | 2s@102%~110%, 10s@110%~130%, 3s@130%~150%, 400ms@>150% | |||
| Grid-connected Operation | ||||
| Output Voltage | 220/230/240VAC | |||
| Grid Voltage Range | 170–265VAC | |||
| Grid Frequency Range | 49–51Hz / 59–61Hz | |||
| Output Current | 17.4A | 26.9A | 37.4A | 47.8A |
| Power Factor Range | >0.99 | |||
| Max Efficiency (DC/AC) | >98% | |||
| Battery & PV Input | ||||
| Rated Voltage | 24VDC | 48VDC | ||
| Constant Charging Voltage | 28.2VDC | 56.4VDC | ||
| Float Charging Voltage | 27VDC | 54VDC | ||
| PV Charging Method | MPPT | |||
| Max PV Input Power | 6500W | 8500W | 2×6500W | 2×7500W |
| PV Input Voltage Range | 60–500VDC / 90–500VDC | |||
| MAX PV Input Voltage | 500VDC | |||
| MAX PV Input Current | 27A | 27A | 27A / 27A | 27A / 27A |
| MAX PV Charge Current | 120A | 120A | 150A | 150A |
| MAX AC Charge Current | 100A | 100A | 150A | 150A |
| MAX Charge Current | 120A | 120A | 150A | 150A |
| LCD | Can display operating mode/load/input/output | |||
| RS232 | 5PIN/Pitch2.54mm, Baud Rate 2400 | |||
| Expansion Slot | Lithium Battery BMS Communication Card, WIFI 2×5PIN/Pitch2.54mm | |||
| Parallel Interface | Not Support Parallel | |||
| Operating Temperature | 0°C ~ 40°C | |||
| Storage Temperature | -15°C ~ 60°C | |||
| Altitude | ≤1000m; if >1000m, rate power will lower. MAX 4000m | |||
| Operating Humidity | Non-condensing | |||
| Noise | ≤50dB | |||
| Dimensions (L×W×H mm) | 495×312×125mm | |||
| Model | GA6248SMHB | GA8648SMHB | GA11048SMHB |
| Nominal Voltage | 220/230/240VAC | ||
| Voltage Range | 90–280VAC±3V (Inverter Mode), 170–280VAC±3V (UPS Mode) | ||
| Frequency | 50–60Hz Auto sensing | ||
| Rated Output Power | 6200W | 8600W | 11000W |
| Output Voltage (AC) | 220/230/240VAC ±5% | ||
| Output Frequency | 50/60Hz ±0.1% | ||
| Waveform | Pure sine wave | ||
| Transfer Time (AC to DC) | 10ms for Computer / 20ms for Household Equipment | ||
| Peak Power | 12400VA | 16000VA | 22000VA |
| Overload Capacity (Battery Mode) | 2s@105–150% Load | 11s@105–200% Load | 400ms@>200% Load |
| Grid-connected Operation | |||
| Output Voltage | 220/230/240VAC | ||
| Grid Voltage Range | 195–253VAC | ||
| Grid Frequency Range | 49–51Hz / 59–61Hz | ||
| Output Current | 26.9A | 34.7A | 47.8A |
| Power Factor | >0.99 | ||
| Max Efficiency (DC/AC) | 98% | ||
| Battery & PV Input | |||
| Nominal Battery Voltage | 48VDC | ||
| Constant Charging Voltage | 56.4VDC | ||
| Float Charging Voltage | 54VDC | ||
| PV Charging Way | MPPT | 2×MPPT | |
| Max PV Input Power | 8500W | 2×6500W | 2×7500W |
| MPPT Controller Voltage | 60–500VDC | 90–500VDC | |
| MAX PV Input Voltage | 500VDC | ||
| MAX PV Charge Current | 120A | 150A | 150A |
| MAX AC Charge Current | 120A | 120A | 150A |
| MAX Total Charge Current | 120A | 150A | 150A |
| LCD Display | AC input voltage, AC frequency, PV voltage/current, output voltage, battery voltage, load current, etc. | ||
| RS232 | 5PIN / Pitch 2.0mm | ||
| Expansion Slot | 2×5PIN / Pitch 2.54mm, Lithium battery BMS communication card, WiFi, etc. | ||
| Parallel Interface | Yes, max 9 parallel machines | ||
| Operating Temperature | -10°C ~ 50°C | ||
| Humidity | 20%–95% (Non-condensing) | ||
| Storage Temperature | -15°C ~ 60°C | ||
| Altitude | ＜1000m | ||
| Noise (dB) | ≤50dB | ||
| Model | BH4024SMH | BH6248SMH | BH8648SMH | BH11048SMH |
| Input Formation | L+N+PE | |||
| AC Input | 220/230/240VAC | |||
| Input Voltage Range | 90–280VAC±3V (Normal) / 185–264VAC±3V (UPS Mode) | |||
| Frequency | 50/60Hz (Adaptive) | |||
| Rated Power | 4000W | 6200W | 8600W | 11000W |
| Dual Output Power | 4000W/4500W | 6200W/6500W | 8600W/11000W | 8600W/12000W |
| Output Voltage (AC) | 220/230/240VAC ±5% | |||
| Output Frequency | 50/60Hz ±0.1% | |||
| Output Wave | Pure Sine Wave | |||
| Transfer Time (Adjustable) | 10ms for Computer / 20ms for Household Equipment | |||
| Peak Power | 8000VA | 12400VA | 17200VA | 22000VA |
| Overload Ability | Battery Mode: 2s@102%–110%, 10s@110%–130%, 3s@130%–150%, 400ms@>150% | |||
| Grid Connected Operation | ||||
| Output Voltage | 220/230/240VAC ±5% (Feed-in Grid Voltage Range: 195–253VAC) | |||
| Grid Voltage Range | 170–265VAC | |||
| Grid Frequency Range | 49–51Hz / 59–61Hz | |||
| Power Factor Range | >0.99 | |||
| Max Efficiency (DC/AC) | 98% | |||
| Battery & PV Input | ||||
| Rated Voltage | 24VDC | 48VDC | ||
| Constant Charging Voltage | 28.2VDC | 56.4VDC | ||
| Float Charging Voltage | 27VDC | 54VDC | ||
| PV Charging Method | MPPT | MPPT | 2×MPPT | |
| Max PV Input Power | 6500W | 6500W | 2×6500W | 2×7500W |
| PV Input Voltage Range | 60–500VDC | 60–500VDC | 90–500VDC | |
| MAX PV Input Voltage | 500VDC | |||
| MAX PV Input Current | 27A | 27A | 27A/27A | 27A/27A |
| MAX PV Charge Current | 120A | 120A | 150A | 150A |
| MAX AC Charge Current | 100A | 100A | 150A | 150A |
| MAX Charge Current | 120A | 120A | 150A | 150A |
| LCD | Can display operating mode/load/input/output | |||
| RS232 | 5PIN / Pitch 2.54mm, Baud Rate 2400 | |||
| Expansion Slot Communication | Lithium Battery BMS Communication Card, WIFI, 2×5PIN / Pitch 2.54mm | |||
| Parallel Interface | Not Support | Support Parallel | ||
| Operating Temperature | -10°C ~ 50°C | |||
| Storage Temperature | -15°C ~ 60°C | |||
| Ork Altitude | No more than 1000m, if >1000m power derates. MAX 4000m, refer manual | |||
| Operating Humidity | Non Condensing | |||
| Noise | <50dB | |||
| Dimensions (L*W*H) | 483×313×143mm | 570.8×471×148.2mm | ||
| MODEL | IV4024SMH | IV6248SMH | IV11048SMH |
| Rated input voltage | 220/230/240VAC | ||
| Voltage range | 90–280VAC±3V (Normal Mode), 170–280VAC±3V (UPS Mode) | ||
| Frequency range | 50Hz/60Hz (Adaptive) | ||
| OUTPUT | |||
| Battery Inverter | 4000W | 6200W | 11000W |
| Photovoltaic Inverter | 4500W | 6500W | 12000W |
| Peak Power | 8000VA | 12400VA | 22000VA |
| Output voltage | 220/230/240VAC±5% | ||
| Output frequency | 50/60Hz±0.1% | ||
| Waveform | Pure Sine Wave | ||
| Switching time (adjustable) | Computer equipment 10ms, home appliances 20ms | ||
| Overload capacity | Battery Mode: 1s@105%-150% Load; 2s@150%-200% Load; 400ms@>200% Load | ||
| GRID-CONNECTED OPERATION | |||
| Output voltage | 220/230/240VAC | ||
| Grid feeding voltage range | 195–253VAC | ||
| Grid feeding frequency range | 49–51±1Hz / 59–61±1Hz | ||
| Nominal output current | 17.4A | 26.9A | 47.8A |
| Power factor range | >0.99 | ||
| Maximum conversion efficiency (DC/AC) | 98% | ||
| BATTERY | |||
| Rated voltage | 24VDC | 48VDC | |
| Constant voltage charging (configurable) | 28.2VDC | 56.4VDC | |
| Float charging voltage (configurable) | 27VDC | 54VDC | |
| PV CHARGER | |||
| PV charging method | MPPT | ||
| Maximum input power of PV | 6500W | 8500W | 8500W |
| MPPT input voltage range | 60–500VDC | ||
| Optimal Vmp operating range | 300–400VDC | ||
| Maximum PV input voltage | 500VDC | ||
| Maximum PV input current | 27A | 27A | 27A/27A |
| Maximum PV charging current | 120A | 120A | 150A |
| Maximum mains charging current | 100A | 100A | 150A |
| Maximum charging current | 120A | 120A | 150A |
| DISPLAY | |||
| LCD Interface | LCD Interface: Can display operation mode/load/input/output, etc. | ||
| INTERFACE | |||
| RS232 | Baud rate 2400 | ||
| Expansion slot communication interface | Lithium battery BMS communication card, WIFI card, dry contact card, etc. | ||
| Parallel interface | No parallel function | Parallel (network) function | |
| ENVIRONMENTAL PARAMETERS | |||
| Operating ambient temperature | -10°C ~ +50°C | ||
| Operating environment humidity | 20%~95% (No condensation) | ||
| Storage temperature | -15°C ~ +60°C | ||
| Noise | ≤50dB | ||
| PHYSICAL PARAMETERS | |||
| Depth × width × height (mm) | 483×313×143 mm | ||
| Standards and certifications | EN-IEC 60335-1, EN-IEC 60335-2-29, IEC 62109-1 | ||
| Model | KA18048SS | KA33048SS |
| Input Formation | L1+L2+L3+N+PE | |
| Rated Input Voltage | 3×380VAC/400VAC (3-Phase+N line) | |
| Voltage Range | 155–483VAC±3V (Normal) | 295–483VAC±3V (UPS Mode) |
| Frequency | 50Hz/60Hz (Adaptive) | |
| Output Rated Power | 18000W | 33000W |
| Output Voltage | 380VAC ±5% | |
| Output Frequency | 50/60Hz ±0.1% | |
| Output Wave | Pure Sine Wave | |
| Transfer Time (Adjustable) | 10ms for Computer, 20ms for Household Equipment | |
| Peak Power | 36000W | 66000W |
| Overload Ability | Battery Mode: 2s@105%–150%, 11s@150%–200%, 400ms@>200% | |
| Grid Connected Operation | ||
| Output Voltage | 380VAC | |
| Feed-in Voltage Range | 337–437VAC | |
| Feed-in Frequency Range | 49–51Hz / 59–61Hz | |
| Nominal Output Current | 3×26.9A | 3×47.8A |
| Power Factor Range | >0.99 | |
| Maximum Conversion Efficiency (DC/AC) | 98% | |
| Battery & PV Input | ||
| Rated Voltage | 48VDC | |
| Constant Voltage Charging (Adjustable) | 56.4VDC | |
| Floating Charging Voltage (Adjustable) | 54VDC | |
| Charging Mode | Three Routes MPPT | Six Routes MPPT |
| Max PV Input Power | 3×7500W | 6×5500W |
| MPPT Tracking Range | 90–500VDC | |
| Max PV Input Voltage | 500VDC | |
| Max PV Input Current | 3×27A | 6×18A |
| Max PV Charge Current | 360A | 450A |
| Max AC Charge Current | 300A | 450A |
| Max Charge Current | 360A | 450A |
| LCD | Can display operating mode/load/input/output | |
| RS232 | Baud Rate 2400 | |
| Expansion Slot Communication Interface | Lithium Battery BMS Communication Card, WIFI, dry contact | |
| Operating Temperature | -10~50℃ | |
| Operating Environment Humidity | 20%–95% (Without Condensation) | |
| Storage Temperature | -15~60℃ | |
| Ork Altitude | No more than 1000m, if >1000m, rate power will lower. Max 4000m (Refer) | |
| Noise | ≤50dB | |
| Model | LA5548SMH-G | LA11048SMH-G |
| Rated Power | 5500VA / 5500W | 11000VA / 11000W |
| Input | ||
| Voltage | 230VAC | |
| Voltage Range | 170–280VAC (UPS Mode) | 90–280VAC (Inverter Mode) |
| Frequency Range | 50Hz / 60Hz (Adaptive) | |
| Output | ||
| Output Voltage | 230VAC ±5% | |
| Peak Power | 11000VA | 22000VA |
| Conversion Efficiency (maximum) | 98% | |
| Output Frequency | 50/60Hz ±0.1% | |
| Switching Time | 10ms (Computer) / 30ms (Household) | |
| Output Waveform | Pure Sine Wave | |
| Open Circuit Losses | <55W | <80W |
| Solar Charging and Mains Charging | ||
| PV Charging Method | MPPT | |
| Max PV Input | 5500W | 2×5500W |
| MPPT Tracking Range | 90–500VDC | |
| MAX PV Charging Current | 100A | 150A |
| MAX AC Charging Current | 60A | 150A |
| MAX Charging Current | 100A | 150A |
| Dimensions (L×W×H) | 610×170×370mm | 630×250×475mm |
| Battery Model | ||
| Battery Capacity | 5120WH | 11776WH |
| Battery Voltage | 51.2VDC | |
| Battery Type | LiFePO4 | |
| Full Charge Voltage (FC) | 56V | |
| Full Discharge Voltage (FD) | 42V | |
| MAX Continuous Discharge Current | 100A | 200A |
| MAX Discharge Current | 120A (1min) | 230A (1min) |
| Protection | BMS, Relay | |
| Charging Voltage | 56V | |
| Charging Current (Recommended) | 50A (0.5C) | 115A (0.5C) |
| Charging Current (Max) | 100A | 200A |
| Battery Dimensions (L×W×H) | 610×170×490mm | 630×250×525mm |
| Model | ME1012/24 | ME1312/24 | ME1512/24 | ME2012/24/48 | ME3024/48 | ME5024/48 |
| AC Input Voltage | 220VAC (standard) / 110VAC (customized) | |||||
| Input Voltage Range |
220V model: 154–264VAC±3V (normal mode) / 185–264VAC±3V (UPS mode) 110V model: 77–132VAC±3V (normal mode) / 92–132VAC±3V (UPS mode) |
|||||
| Input Frequency | 50/60Hz±5% | |||||
| Rated Output Power | 800W | 1000W | 1200W | 1600W | 2400W | 4000W |
| Output Voltage (City Power) | Same as input voltage | |||||
| Output Frequency (City Power) | Same as input frequency | |||||
| Output Voltage (Inverter) | 220VAC±10% (110VAC±10%) | |||||
| Output Frequency (Inverter) | 50Hz or 60Hz ±1% | |||||
| Output Waveform (Inverter) | Pure sine wave | |||||
| Battery Type | External lead-acid, water battery, or lithium battery | |||||
| Battery Voltage | 12VDC / 24VDC | 24VDC / 48VDC | ||||
| Charging Voltage | 13.7VDC | 13.7VDC | 13.7VDC | 27.4VDC / 54.8VDC | 27.4VDC / 54.8VDC | 27.4VDC / 54.8VDC |
| Solar Input | ||||||
| Maximum PV Array Power | 12V: 400W 24V: 800W | 12V: 800W / 24V: 1600W 48V: 3200W | ||||
| Solar Input Voltage Range | 12V: PWM 15–50VDC 24V: PWM 30–60VDC |
12V: MPPT 15–150VDC / PWM 15–50VDC 24V: MPPT 30–150VDC / PWM 30–60VDC 48V: MPPT 60–150VDC / PWM 60–105VDC |
||||
| Max PV Display Open Voltage | 12V: PWM 50VDC 24V: PWM 60VDC |
12V: MPPT 150VDC / PWM 50VDC 24V: MPPT 150VDC / PWM 105VDC 48V: MPPT 150VDC / PWM 105VDC |
||||
| Optimal Vmp Range | 12V: PWM 15–20VDC 24V: PWM 30–40VDC |
同上（匹配 PWM / MPPT 输入） | ||||
| Maximum Solar Charging Current | 30A | 60A | ||||
| AC Charging | ||||||
| Maximum AC Charging Current | 19A/10A | 24A/12A | 29A/15A | 39A/19A/10A | 29A/15A | 49A/24A |
| Transfer Time | ≤10ms (UPS) / ≤20ms (INV) | |||||
| Peak Load Ratio | (MAX) 3:1 | |||||
| Standby Power | 12V: 8W | 12V: 8W | 12V: 8W | 24V: 16W | 24V: 16W | 48V: 32W |
| Protection | ||||||
| Under AC Power | Input overcurrent, non-fuse switch | Input overcurrent, air switch | ||||
| Under Inverter | Overload, short circuit, low voltage, reverse battery, etc. | |||||
| Status Display | Color segment code screen + LED display | |||||
| Display Features | View AC voltage, frequency, PV voltage/current, battery/load status, etc. | |||||
| LED Display | Displays power, charging status, inverter status, and fault info | |||||
| Voice Prompt | Different buzzers indicate different faults (short vs long sounds) | |||||
| Environmental | ||||||
| Operating Temperature | -10°C to 50°C | |||||
| Storage Temperature | -15°C to 45°C | |||||
| Relative Temperature | -10°C to 90°C, no condensation | |||||
| Noise | <45dB | |||||
| Product Dimensions (mm) | 325×263×128 | 360×316×298 | ||||
| Model | ME1012/24 | ME1312/24 | ME1512/24 | ME2012/24/48 | ME3024/48 | ME5024/48 |
| AC Input Voltage | 220VAC (standard) / 110VAC (customized) | |||||
| Input Voltage Range |
220V model: 154–264VAC±3V (normal mode) / 185–264VAC±3V (UPS mode) 110V model: 77–132VAC±3V (normal mode) / 92–132VAC±3V (UPS mode) |
|||||
| Input Frequency | 50/60Hz±5% | |||||
| Rated Output Power | 800W | 1000W | 1200W | 1600W | 2400W | 4000W |
| Output Voltage (City Power) | Same as input voltage | |||||
| Output Frequency (City Power) | Same as input frequency | |||||
| Output Voltage (Inverter) | 220VAC±10% (110VAC±10%) | |||||
| Output Frequency (Inverter) | 50Hz or 60Hz ±1% | |||||
| Output Waveform (Inverter) | Pure sine wave | |||||
| Battery Type | External lead-acid, water battery, or lithium battery | |||||
| Battery Voltage | 12VDC / 24VDC | 24VDC / 48VDC | ||||
| Charging Voltage | 13.7VDC | 13.7VDC | 13.7VDC | 27.4VDC / 54.8VDC | 27.4VDC / 54.8VDC | 27.4VDC / 54.8VDC |
| Solar Input | ||||||
| Maximum PV Array Power | 12V: 400W 24V: 800W | 12V: 800W / 24V: 1600W 48V: 3200W | ||||
| Solar Input Voltage Range | 12V: PWM 15–50VDC 24V: PWM 30–60VDC |
12V: MPPT 15–150VDC / PWM 15–50VDC 24V: MPPT 30–150VDC / PWM 30–60VDC 48V: MPPT 60–150VDC / PWM 60–105VDC |
||||
| Max PV Display Open Voltage | 12V: PWM 50VDC 24V: PWM 60VDC |
12V: MPPT 150VDC / PWM 50VDC 24V: MPPT 150VDC / PWM 105VDC 48V: MPPT 150VDC / PWM 105VDC |
||||
| Optimal Vmp Range | 12V: PWM 15–20VDC 24V: PWM 30–40VDC |
同上（匹配 PWM / MPPT 输入） | ||||
| Maximum Solar Charging Current | 30A | 60A | ||||
| AC Charging | ||||||
| Maximum AC Charging Current | 19A/10A | 24A/12A | 29A/15A | 39A/19A/10A | 29A/15A | 49A/24A |
| Transfer Time | ≤10ms (UPS) / ≤20ms (INV) | |||||
| Peak Load Ratio | (MAX) 3:1 | |||||
| Standby Power | 12V: 8W | 12V: 8W | 12V: 8W | 24V: 16W | 24V: 16W | 48V: 32W |
| Protection | ||||||
| Under AC Power | Input overcurrent, non-fuse switch | Input overcurrent, air switch | ||||
| Under Inverter | Overload, short circuit, low voltage, reverse battery, etc. | |||||
| Status Display | Color segment code screen + LED display | |||||
| Display Features | View AC voltage, frequency, PV voltage/current, battery/load status, etc. | |||||
| LED Display | Displays power, charging status, inverter status, and fault info | |||||
| Voice Prompt | Different buzzers indicate different faults (short vs long sounds) | |||||
| Environmental | ||||||
| Operating Temperature | -10°C to 50°C | |||||
| Storage Temperature | -15°C to 45°C | |||||
| Relative Temperature | -10°C to 90°C, no condensation | |||||
| Noise | <45dB | |||||
| Product Dimensions (mm) | 325×263×128 | 360×316×298 | ||||